FAQ about media converters - Part 1
Media Converter Frequently Asked Questions
Here are some common questions and answers regarding media converters.
==========================================================
Q. Is there a way to update the firmware of a media converter as a standalone unit?
A. Standalone updates are not possible. Please use the LEX1012-15/45 chassis and LEX1930-00 management card in conjunction with the unit.
------------------------------
Q. Is it acceptable to use Cat6A cables with the UTP ports (10BASE-T/100BASE-TX/1000Base-T ports)?
A. Yes, that is perfectly fine.
------------------------------
Q. What is LFP?
A. LFP (Link Fault Pass-Through) is a feature that disables communication on one port when a link down event occurs on the other port. Using this function enables link down detection at both the local office and customer premises, regardless of whether a UTP or fiber optic cable is disconnected on the path where the media converters are connected.
------------------------------
Q. What is the initial state of the DIP switches?
A. All DIP switches are set to OFF.
------------------------------
Q. Is it okay to mount the unit vertically using only the included accessories?
A. Yes, that is perfectly fine.
------------------------------
Q. Can I connect a PoE-compatible hub to the LAN port?
A. Yes, communication will function correctly.
------------------------------
